Brand: FORENSICS DETECTORS
Compatible Detectors: FD-600 (all versions), FD-PUMP
- ⚛️ Description: This 1-inch probe is a generic probe that can be used in a variety of gas sampling such as headspace analysis, R&D experiments or excellent for gas sampling isolation - to find a small leak.
- 📶 How does it work? You can connect the tubing directly to a detector with a micro-pump such as our FD-600 analyzers, or to a pump inlet port, that will serve as a sampling probe.
- 👫 Instructions: As shown in the image, hold the probe. On the probe tip, air will be drawn into the probe, through the tubing to your detector. On the other end, which is the tubing, it must be connected to a pump or analyzer with built-in pump.
- 🔣 Specifications: 1 x 22G 1 inch syringe needle with luer lock. 1 x luer lock to barb connector. 1 x Polyethersulfone Membrane (PES) microporous filter. 1 x 8 inches of high temperature and flexible silicone tubing (ID 3mm, OD 5mm). The total length of the assembly is about 1 foot.