Carbon Monoxide Analyzer | H2 Compensated | Landfill & Biogas | NIST Calibration

Brand: FORENSICS DETECTORS
Model: FD-600-CO-LAND
Data Logging: Click Here
User Manual (PDF): EN | DE | FR | ES | IT |
Application Guide: Blog explanation
EPA Conformance: Click Here

Features:

• 🎆 DETECT: Carbon monoxide analyzer measuring 0 -1000 ppm with 1 ppm resolution. Built-in pump for super-fast detection. 
• 🔬 SPECIAL: Special electrochemical H2 compensated CO sensor. Sensor made in the UK. Specifically made for landfill and biogas applications and other applications where H2 cross-interference may be problematic for a regular CO analyzer.
• 🌈 COLOR DISPLAY: Color screen and graph functions allow for easy and intuitive operation. USB computer data logging included.
• 📲 ALARMS: Adjustable audio, visual, and vibration alarms.
• 💪 STRONG: Shockproof, water-resistant, dustproof, and explosion-proof.
• 🕵️ TRUSTWORTHY: 1-year limited warranty. Arrives with a signed and dated calibration certificate.

Details: This is a top-quality FORENSICS DETECTORS carbon monoxide analyzer made specifically for landfill gas applications. It has a built-in pump allowing for super-fast detection & response, a carbon filter, and a water trap. This carbon monoxide analyzer has a 32-bit microprocessor, color LCD, and graphing capability. The unit fulfills the requirements as set by "ALTERNATIVE METHOD FOR THE FIELD DETERMINATION OF CARBON MONOXIDE CONCENTRATION IN LANDFILL GAS WELLHEADS UNDER 40 CFR 63, SUBPART AAAA." These requirements were approved on 09/14/2021. Some highlights of the CO Analyzer requirements include:

• CO analyzers must have an H2-compensated CO sensor. 
• CO analyzers with electrochemical sensors must have a carbon filter to remove H2S.
• CO analyzers must not show interference from methane (CH4), carbon dioxide (CO2), oxygen (O2), and nitrogen (N2) that are commonly found in landfill gas.
• The liquid must be prevented from entering the analyzer by a water trap or similar filter.
• The gas sample hose from the wellhead to the gas analyzer must be made of silicone, PVC, or other similar material that does not absorb or otherwise alter the sample gas.
• CO analyzer should have a vacuum pump suitable to pull against the wellhead vacuum and to transport gas from the sample point to the analyzer.
• CO Analyzer must be tested to NIST-traceable sources with +/- 2% accuracy (two-point calibration and verification, ZERO and SPAN). A certificate must be provided by the manufacturer with the product.
• CO Analyzer response with an R-squared greater than or equal to 0.975 to be considered linear.

Included: Carbon monoxide analyzer, user manual, USB charging cable, charger, analyzer case, water trap, carbon filter, stainless probe, tubing, and certified calibration certificate.

Calibration Options:  
1. Professional Calibration: Serviced by Forensics
2. Calibration Guide: Calibrate It Yourself

Calibration Kit (DIY sold separately):  
Calibration Gas (CO)
Calibration Gas Regulator (C10)
Calibration T-piece & Tubing
Bump Gas (CO)

Accessories (sold separately):  
Gas Detector Waterproof Case
Gas Detector Stand
Telescopic Probe
Tubing (3ft)
Gas Sensor Replacement (CO)

Specifications

Carbon Monoxide (CO) Detection: 0 - 1000 ppm with 1 ppm resolution
Gas Sensor Type: Electrochemical Gas Sensor (H2-compensated CO sensor)
Gas Sensor Life: 2 - 3 years
Sampling Type: Pumped (built-in sampling pump)
Recommended Calibration Period: 12 months
Datalogging: Yes (instructions included)
Error: ≤ ± 5% F.S.
Response Time: ≤ 20 sec
Store / Operating Temp: 0 to 122°F (−18 to 50°C)
Store / Operating Humidity: <95%RH
Battery: DC3.7V Li-on battery, 3200mAh
Explosion Rating: ATEX certified Ex ia IIC T4 Ga (PDF)
Weight: 14 oz (400 g)
Dimensions: 5.1 × 2.6 × 1.2 inches (13.0 × 6.6 × 3.0 cm)
Charge Time: 4 hours
Operating Time: > 10 hours
Pump Rate: 0.3 LPM - 0.5 LPM (300 - 500 cc/min)
Alarm: LED, Buzzer, and Vibration
Calibration Location (USA): Los Angeles, California, USA
Calibration Standard (USA): USA NIST Traceable Gas Source
Calibration Location (Europe): Athens, Greece
Calibration Standard (Europe): European NPL Traceable Gas Source