Carbon Monoxide | Bump Gas for Low-Level CO Detectors

Brand: GASCO
Model: 10L-50-70
Gas: 70 ppm carbon monoxide (CO) in air, 10 liter
Compatible Detectors: FD-V001, FD-D001, FD-103-CO-LOW (low level CO Detectors)
Safety Data Sheet (SDS): Click Here

• ⚛️  USE: Your gas detector, meter, or analyzer must be bump tested to make sure it is functioning as expected. GASCO bump gas cans ensure proper bump testing. Daily bump testing is recommended to validate operation and alarm functionality. To operate, tear off the blue tab on the top of the trigger. Then place the nozzle on your monitor's sensor area and squeeze the trigger for 1 to 2 seconds. Confirm the alarms are triggering and the detector responds to the bump gas.

• 🔬 ACCURATE: NIST traceable source calibrated gas. ISO 9001:2008 certified process. Ships with a Certificate of Analysis (COA).

• 🕵️ TRUSTWORTHY: Forensics Detectors is an authorized distributor of GASCO® products. GASCO calibration gas meets or exceeds the requirements of the Original Gas Detection Equipment Manufactures Specifications. 

• ♻️ MATERIALS: Recyclable and disposable.

• 📚 TERMS: Non-cancelable / non-returnable.

Specifications

Pressure: 160 PSI (Varies with Gas Type)
Gas Type: All Gases (reactive and non-reactive)
Height: 9.5 in
Diameter: 2.75 in
Weight: 0.9 lbs
Material: Aluminum Alloy
Valve Inlet: Trigger Aerosol
Contents Volume: 10 liters
Shelf Life: 24 months