Carbon Disulfide Detector | USA NIST Calibration

  • Sale
  • $995.00
  • Regular price $1,855.00

Model: FD-90A-CS2
User Manual: Click Here
Blog Article: Click Here


  • 🔋 ACCURACY: Made to detect carbon disulfide gas (CS2) in air, 0 - 100 ppm with 1 ppm resolution. Comes FACTORY-CALIBRATED.
  • ⚛️ DETECT: Electrochemical cell sensor and response time: T < 30 sec. Zero and span calibration options. Comes factory-calibrated.
  • 🎆 ALARMS: Adjustable audio, visual, and vibration alarms alert when preset levels are reached. Alarms come with digital time stamping and logging.
  • 💪 STRONG: Shockproof, water-resistant, dustproof, and explosion-proof with belt clip. Rechargeable Li-ion battery 1500 mAh via micro-USB cable, comes with all accessories.
  • 🕵️ TRUSTWORTHY: ** 1-year limited warranty ** Arrives with calibration and QA certificates ** Product tested and verified in the USA ** 

Details: The professional Carbon Disulfide (CS2) gas meter by FORENSICS. Carbon Disulfide gas detectors are typically used in rubber processing facilities, in cellophane production sites, and rayon fabric manufacturing environments. Carbon Disulfide has a rotten egg odor and is toxic when taken in through the respiratory system or the skin. The human nose alone cannot reliably detect Carbon Disulfide, so a Carbon Disulfide monitor is helpful to prevent excessive harmful exposure. Exposure limits for CS2 include the OSHA Permissible Exposure Limit (8 hours) 20ppm. 30ppm is ceiling and 100ppm is peak. NIOSH recommended airborne exposure limit (REL) is 1 ppm and 10 ppm, not to be exceeded during any 15-minute work period.

Included: Gas detector, belt clip, sling, English manual, USB charging cable, calibration cover, and USA NIST calibration certificate.

Accessories (sold separately): 
Calibration Gas (CO) (Surrogate Gas 200ppm CO : 100ppm CS2 is used for calibration)
Calibration Gas Regulator (C10)

Accessories (sold separately): 
Pump and Probe
Gas Detector Hard Case
Gas Detector Pouch
Gas Detector Stand
Gas Sensor Replacement (CS2) (email us)

Calibration Service:
Gas Detector Calibration Service


Carbon Disulfide Gas (CS2) detection: 0 - 100 ppm with 1 ppm resolution
Accuracy: better than ± 10% F.S
Response time: T < 30 sec
Indication: LCD indicates the time, concentration, temp, and battery state
Alarm: Indication of alarm, fault, and low voltage with LED, sound, and vibration Operating temperature: 0F - 122F
Operating humidity: < 95% RH non-condensing
Voltage: DC 3.7V Li-battery 1500 mAh
Working time: > 24 hours
Charging time: 4 hours
Sensor life: 2 - 3 years
Recommended calibration period: 6-12 months
Protection category: IP65
Weight: about 130 g (including battery)